| System Structure |
Product |
4MP Starlight Full-Color USB Camera Module |
8MP Starlight Full-Color USB Camera Module |
| Main Control |
Embedded single-core 32-bit ARM A35 processor, pure hardware compression, integrated FPU and NEON internally, main frequency 1.2GHz |
| DDR |
2Gb (Built-in) |
| Flash |
16MB |
| System Architecture |
Linux |
| Sensor |
SmartSens 1/1.8" 4MP Low-light CMOS |
SmartSens 1/1.8" 8MP Low-light CMOS |
| Audio and Video Coding |
Video Compression Format |
H.265、H.264、MJPEG、YUY2、N12 |
| Audio Compression Format |
G.711 |
| Video Format |
2688x1520(400MP)/30fps、2560x1440(300MP)/30fps;2304x1296(300MP)/30fps、1920x1080/30fps |
3840x2160(800MP)/25fps、2880x1620(400MP)/30fps、 2560x1440(300MP)/30fps、2304x1296(300MP)/30fps、 1920x1080/30fps |
| Minimum Illuminance |
Color [email protected] |
Color [email protected] |
| Signal-to-Noise Ratio (SNR) |
>60db(AGC OFF) |
>70db(AGC OFF) |
| Wide Dynamic Range |
Wide Dynamic Range |
| Image Processing |
Supports 3D noise reduction, image enhancement, dynamic contrast enhancement processing functions. Supports anti-flicker processing for video and graphics output, video support, and video and graphics overlay |
| ISP |
Supports 4x4 Pattern RGB-IR sensor, 3A (AE/AWB/AF), third-party 3A algorithms, fixed pattern noise elimination, bad pixel correction, lens shadow correction, lens distortion correction, purple edge correction, gamma correction, dynamic contrast enhancement, color management and enhancement, multi-level noise reduction (BayerNR, 3DNR), and sharpening enhancement. 2F-WDR |
| Maximum Capture Image |
2688x1520(400MP) |
3840x2160(800MP) |
| Maximum Video Input |
2880x1620/25fps |
3840x2160(500万)/25fps |
| Image Settings |
Brightness, Contrast, Saturation, Sharpness, etc. |
| Protoco |
USB Protoco |
Brightness, Contrast, Saturation, Sharpness, etc. |
| Compatibility |
Compatible with all types of USB interfaces and operating systems |
| Interface |
USB TYPE-C Interface |
1 port, USB2.0 video output, supports lithium battery power supply and charging |
| Audio Input Interface |
Microphone input or linear input (1Vvpp) |
| TF Card Interface |
1 port, maximum support 512GB |
| IO Port |
2 ports, 3.3V level, can be defined for alarm input, alarm output, ADC, communication and other functions |
| Serial Port |
2 channels, TTL level 3.3V |
| Working Indicator Light |
Power indicator light: Red light. Normal voltage: Red light on; Abnormal voltage: Red light off. Working status indicator light: Green light. Normal system operation: Green light slow flash; Recording: Green light fast flash; System abnormal: Green light off or always on |
| Charging and Discharging Indicator Light |
Red light. Charging process: Flashing; Fully charged: Always on Discharging process: Red light on; Low battery: Red light flashing |
| Reset Interface |
1 port, short press for 5 seconds to restore factory settings |
| Basic Parameters |
Operating Temperature |
-20~70°C |
| Operating Humidity |
Below 90%RH |
| Operating Voltage |
DC6-12V(+/-10%) |
| Power Consumption |
Typ. 1.6W |
Typ. 1.8W |
| PCBA Size |
Mainboard: 50mm (length) x28mm (width) x5mm (height) |
Sensor Board: 26mm (length) x19mm (width) x4mm (height) |