In embedded AI vision project development, many engineers choose the Sony FCB-EV9520L integrated camera module paired with the Rockchip RK3588 main processor for solution development. However, many encounter a tricky problem: the FCB-EV9520L outputs LVDS video signals, while the Rockchip RK3588’s image capture channel is a MIPI CSI-2 interface. The two are incompatible at the physical layer and in signal protocol, so they cannot be connected directly.
To unleash the camera module’s 30x optical zoom and starlight-level low-light imaging capabilities, while leveraging the RK3588’s powerful NPU computing power for AI recognition, target tracking, image analysis, and other services, a stable and mature LVDS to MIPI adapter solution is essential.
I. Why Has This Become a Popular Embedded Selection?
The Sony FCB-EV9520L is a cost-effective model among industrial integrated zoom camera modules. It is equipped with a STARVIS 2 sensor, supports 30x optical zoom and 1080P@60fps HD output, delivers excellent low-light imaging and true color reproduction, and is widely used in drone inspection, mobile robot vision, precision industrial inspection, remote teaching, and other scenarios. It is the preferred imaging unit for many vision projects.
As an embedded flagship main processor, the Rockchip RK3588 has an 8-core CPU architecture, AI computing power of up to 6 TOPS, and a hardware-integrated codec unit. It supports up to 6 MIPI CSI-2 camera inputs. Once connected, it can directly perform video encoding and network streaming, eliminating the need for an additional video processing chip.
Both perform outstandingly when used separately, but there is an inherent interface barrier: the RK3588’s CSI channels only support standard MIPI signals and do not support direct LVDS capture. This becomes the bottleneck for project implementation.
II. How Does the LVDS-to-MIPI Adapter Board Achieve Signal Interoperability?
To address development pain points such as connecting the FCB-EV9520L to the RK3588, Xuanzhan Technology, relying on its status as an officially authorized Sony China dealer and more than 17 years of experience in secondary video development, has launched a plug-and-play LVDS-to-MIPI adapter board. Hardware wiring is simple and requires no complex soldering.
Hardware wiring steps:
1. Use an LVDS coaxial cable to connect the FCB-EV9520L to the LVDS input port of the LVDS-to-MIPI adapter board. Pay special attention that the gold fingers face upward; reverse insertion can easily burn out the camera module.
2. Use a 22-pin FPC cable to connect the adapter board’s MIPI CSI-2 output end to the MIPI channel of the RK3588 development board.
3. Use a 6-pin terminal cable to complete power supply and serial port connection for the adapter board. Power is supplied at DC 12V 1A, and the TTL-232 serial port enables VISCA protocol control of the camera module.
The entire hardware link has a low setup threshold and does not require complex FPGA development. It quickly opens up the image transmission channel and retains the camera module’s VISCA protocol control capability. Parameters such as zoom, focus, and white balance can all be adjusted normally.
III. Core Advantages of the Solution: Solving Pain Points in Embedded Vision Projects
1. Miniature and lightweight
The LVDS-to-MIPI adapter board measures only 43 × 43 × 6.5 mm and weighs 8.5 g. Its small size makes it suitable for scenarios with strict space and payload constraints, such as airborne pods and small robot vision compartments, without adding extra burden to the equipment.
2. Low-latency, lossless transmission
Both LVDS and MIPI are high-speed serial image interfaces. The signal conversion process features low latency and no obvious image lag, meeting the real-time requirements of scenarios such as moving target tracking and high-speed inspection.
3. Complete signal specification compatibility, simplifying ISP debugging
The LVDS-to-MIPI adapter board fully supports the FCB-EV9520L’s output specifications such as 1080P@60fps and 720P@60fps, and converts LVDS signals losslessly into standard MIPI CSI-2 signals. After conversion, there is no need to repeatedly debug the RK3588’s ISP parameters, preserving the Sony camera module’s native image quality and color performance and reducing debugging workload.
4. Broad SoC compatibility
The LVDS-to-MIPI adapter board solution is not limited to the Rockchip RK3588. It outputs standard MIPI CSI-2 signals and can be adapted to mainstream SoC platforms such as NVIDIA, HiSilicon, Qualcomm, Allwinner, Raspberry Pi, Horizon, and Mstar. One hardware set can be reused across multiple projects with different main processors, reducing selection costs.
Note: This adapter board only provides a hardware conversion module and does not include supporting drivers for SoC platforms.
The LVDS-to-MIPI adapter board solution is a standardized hardware solution that greatly reduces development difficulty and shortens the project R&D cycle. It is suitable for small- and medium-batch prototype debugging and mass-production project implementation.
FAQ
Q: Can this LVDS-to-MIPI adapter board be used with Sony 4K integrated camera modules?
A: It does not support 4K camera module connection. For 4K integrated camera modules, a 4K HDMI-to-MIPI adapter board is required for adaptation.
Q: Why does the adapter board not come with drivers for various SoCs?
A: The underlying driver architectures of SoCs from different vendors and development boards of different versions differ, making unified adaptation difficult. Therefore, this solution only provides hardware signal conversion, and drivers need to be adapted and developed by engineers based on their own platforms.
Sony FCB camera block